Combine Yield Monitoring in Ireland

Vantage Ireland supplies and fits FarmTRX, the affordable retrofit yield monitor for combines of all ages. If your combine has a clean grain elevator, FarmTRX can turn it into a precision data source, giving you live yield and moisture readings in the cab and automatic yield maps after every field.

There’s no expensive in-cab display to buy. FarmTRX runs on your phone or tablet, installs in as little as 2–4 hours, and is eligible for TAMS grant aid for tillage farmers. We can supply the kit on its own, or fit, calibrate and set it up on your combine and show you how to use it before harvest.

Request a quote or call (021) 203 8827

98.7%accuracy in FarmTRX’s real-world field test
2–4 hrstypical installation time
No displayruns on your phone or tablet
40% TAMSgrant aid under the Tillage scheme

The FarmTRX range

FarmTRX Yield Monitor Lite unit

FarmTRX Yield Monitor Lite

The most affordable way to start yield mapping, with the same accurate yield data as the Pro. Add moisture and header height sensors at any time.

View Yield Monitor Lite →

FarmTRX Yield Monitor Pro unit

FarmTRX Yield Monitor Pro

High-accuracy retrofit with 5 cm GPS, live in-cab mapping, 4G cloud sync and ISOBUS integration with third-party displays.

View Yield Monitor Pro →

FarmTRX moisture sensor

Moisture Sensor

Live grain moisture alongside yield, so you can plan drying and storage while you’re still in the field.

View moisture sensor →

FarmTRX header height sensor

Header Height Sensor

Automatically pauses recording when the header lifts at headlands and turns. No buttons to press, so your data stays clean.

View header sensor →

FarmTRX web app showing a corrected yield map

FarmTRX Web App & Yield Maps

Cloud processing cleans and corrects your data into precision yield maps. Export to leading farm management platforms or connect to FieldView.

View FarmTRX →

Variable-rate prescription map on a PTx Trimble GFX 750 display

Data, Soil Sampling & Variable Rate

Use your yield maps with our data management software, GPS soil sampling and PTx Trimble variable-rate application to act on the variability you find.

Explore data management →

What do you want to find out?

Question on your farm How FarmTRX helps
Which parts of my fields under-perform? Yield maps show low and high zones field by field, year on year
Did that variety or input actually pay? Compare yield across trial strips, varieties and treatments
When should I dry or sell grain? Live moisture readings while you harvest
Where should I vary seed and fertiliser rates? Yield maps feed into soil sampling and variable-rate plans
How are my contract acres performing? Field-by-field records and exports you can share with customers

Not sure what you need? Tell us about your combine and we’ll recommend the right setup.

Will FarmTRX fit my combine?

FarmTRX is a universal retrofit for any combine with a clean grain elevator, including older machines that never came with yield monitoring. Tell us your make, model and year and we’ll confirm.

FarmTRX and TAMS

Yield monitors for combines are an eligible investment under the Tillage Capital Investment Scheme (TCIS) in TAMS 3, and you can retrofit them to your existing combine.

  • 40% grant, calculated on the Department’s reference cost rather than the retail price
  • 60% may apply if you qualify for the Young Farmer or Women Farmer Capital Investment Scheme
  • Investment ceiling of €90,000 per holding (€160,000 for registered farm partnerships)
  • You’ll need at least 15 hectares declared under BISS
  • Get approval before you buy. New equipment only, so second-hand and ex-demo kit isn’t eligible.

Next tranche closes: 4 December 2026. Our team can give you a TAMS-ready quote and talk you through your application.

Get a TAMS quote

See FarmTRX in action

Supply, fitting, set-up and training

Choose supply only, or let our team fit, calibrate and set up FarmTRX on your combine. Every fit includes training on the app and web portal, so you’re confident from the first field. For support, call our office on (021) 203 8827. We can also help you turn your yield maps into soil sampling and variable-rate plans.

Frequently asked questions

Will FarmTRX fit my combine?
FarmTRX is a universal retrofit for combines of all ages with a clean grain elevator. Tell us your make, model and year and we’ll confirm.
How long does installation take?
Installation typically takes 2–4 hours. We can fit it for you, or supply the kit for you or your dealer to install.
Do I need an in-cab display?
No. FarmTRX connects wirelessly to the FarmTRX app on your smartphone or tablet.
How accurate is it?
FarmTRX reported 98.7% accuracy in a real-world test. Like any yield monitor, accuracy depends on calibration, which we set up and show you how to check.
Does it measure moisture?
Yes. With the moisture sensor you get live grain moisture alongside yield.
Can I use my yield maps in other software?
Yes. Maps are processed in the cloud, with FieldView integration and exports to leading farm management platforms.
Is FarmTRX eligible for TAMS?
Yes. Combine yield monitors are eligible under the TAMS 3 Tillage Capital Investment Scheme at 40% of the reference cost (60% may apply for qualifying young farmers and women farmers). Approval is needed before you buy. Contact us for a TAMS-ready quote.

Request a quote

Tell us about your combine (make, model and year) and whether you’re applying for TAMS, and we’ll come back with a recommendation and quote. Or call us on (021) 203 8827.

Know what you need? View the FarmTRX Yield Monitor Pro or Yield Monitor Lite.